Pflugerville Custom Cabinets
Custom Cabinets in Pflugerville, TX
Custom kitchen cabinetry, built-ins, and closet systems in Pflugerville, TX — design, build, install. Free estimates.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Pflugerville and nearby communities.
Get a free estimate
Tell us about the project and how to reach you.
Custom Cabinets
Cabinet Makers Near Pflugerville, TX
Pflugerville Custom Cabinets builds kitchen cabinets, closets, pantries, and built-ins for homes across the area. Some of those homes went up in the 1960s and 70s near downtown. Others are newer, large-lot builds in the subdivisions pushing out from the center of town. Both kinds of houses need different things from a cabinet shop.
Older homes usually need trim matched to existing molding, careful scribing to walls that have settled over fifty years, and refacing that respects what's already there. Newer homes often start from builder-grade boxes that were fine for move-in day but don't hold up to real use. Pflugerville Custom Cabinets handles both, measuring your actual space and building to it rather than pulling from a stock catalog.
What we do
Custom Cabinets services
Custom Cabinets across Pflugerville and the surrounding area.
Custom Kitchen Cabinets
Custom kitchen cabinets in Pflugerville, TX: built-to-fit boxes, wood species and finish options, free estimates.
Learn more →
Custom Kitchen Remodels
Custom kitchen remodels in Pflugerville, TX: layout changes, new cabinetry, and countertop coordination, free estimates.
Learn more →
Built-In Shelving And Wall Units
Built-in shelving and wall units in Pflugerville, TX, built to fit your walls and trim, free estimates on every project.
Learn more →
Custom Closet Systems
Custom closet systems in Pflugerville, TX: shelving, rods, and drawers built to fit your closet, free estimates.
Learn more →
Home Bar Cabinetry
Home bar cabinetry in Pflugerville, TX: built-in storage, countertop fitting, and finish work, free estimates.
Learn more →
Bathroom Vanity Cabinets
Custom bathroom vanity cabinets with moisture-resistant finishes built for single and double-sink bathrooms. Free estimates.
Learn more →
Custom Pantry Cabinets
Custom pantry cabinets in Pflugerville, TX: adjustable shelving and pull-out storage built to fit, free estimates.
Learn more →
Entertainment Center Built-Ins
Entertainment center built-ins in Pflugerville, TX with cable management and trim matched to your room, free estimates.
Learn more →
Looking for something else? Browse all services in the menu, or tell us about a custom project.
Why choose us
Why choose Pflugerville Custom Cabinets
Trim-matching for older homes
Pflugerville homes near downtown often have original molding profiles. We build cabinets and built-ins to match instead of forcing a generic stock trim.
Built-to-wall, not built-to-catalog
Boxes are measured and fit to your actual walls and corners, not a standard width pulled from a showroom brochure.
One point of contact start to finish
The person who measures your kitchen is involved through build and install. No handoffs between sales, shop, and install crews.
Written estimates before cutting starts
You see linear footage, wood species, and finish costs up front, so there's no change-order surprise mid-project.
Have a project in mind?
Get a Free EstimateHow it works
How our Custom Cabinets process works
Step 1Initial Consultation
We discuss your needs, style preferences, and budget to plan the project scope.
Step 2Design And Measurement
Our team measures the space and creates detailed design drawings for approval.
Step 3Material Selection
Clients choose from a range of woods, finishes, and hardware options for their project.
Step 4Fabrication
Cabinets and components are built in our shop using precise joinery and construction techniques.
Step 5Finishing
Each piece receives stain, paint, or sealant to achieve the desired look and durability.
Step 6Installation
Skilled installers fit and secure all cabinetry on-site with attention to detail and alignment.
Ready to start?
Get a Free EstimateCost
What does a Custom Cabinet cost in Pflugerville, TX?
Pricing depends on a few real variables, not a flat per-project number. Here's a rough breakdown. Wood species, finish type, box construction, and hardware grade all shift these numbers. Call for a free estimate once you know roughly which tier fits your project.
| Project type | Typical range | What’s included |
|---|---|---|
| Cabinet refacing | $3,000–$9,000, | new doors and drawer fronts over existing boxes, updated hardware. |
| Single room builds (pantry, vanity, mudroom), custom shelving and finish work for one space. | $2,500–$8,000, | — |
| Closet systems | $1,800–$6,500, | depending on size and whether it's reach-in or walk-in. |
| Full kitchen cabinets | $8,000–$35,000, | box construction, doors, hardware, and finish for a complete kitchen. |
| Built-ins and home bars | $4,000–$15,000, | custom framing and finish work matched to the room. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateMaterials
Materials That Hold Up in Central Texas Heat and Humidity
Central Texas swings from humid summers to dry cold snaps, and that stress shows up in cheap particleboard fast. We stick with materials that handle it.
Plywood Panels
A strong and stable base material used in cabinet box construction.
Solid Hardwood
Premium wood chosen for durability and natural grain appearance.
Laminate Surfaces
A cost-effective finish option offering a range of colors and textures.
Wood Veneer
Thin wood layers applied for a refined, consistent surface finish.
Soft-Close Hardware
Reduces slamming and wear on hinges and slides, which matters over years of daily use.
Custom Hardware Finishes
Handles and knobs selected to match the overall design aesthetic.
Questions on materials?
Get a Free EstimateTimeline
How Long Does a Custom Cabinet Project Take?
Most projects move through the same general stages, though scope changes the math. A pantry or vanity moves faster. A full kitchen remodel takes the full stretch.
- 01
Consult
same day - 02
Design and material selection
1–2 weeks - 03
Build
3–5 weeks - 04
Install
2–4 days
Need a schedule that fits?
Get a Free EstimateCodes & permits
Permits, Codes, and Compliance for Cabinet Work
Pflugerville sits across Travis and Williamson counties, so the permitting office you call can differ depending on your address. Verify with your local office before starting any structural or electrical work.
| Typically needs a permit | Often no permit |
|---|---|
| Relocating electrical outlets or circuits for a kitchen or bar | Straight cabinet swap in the same footprint |
| Moving plumbing lines for a vanity or wet bar | Cabinet refacing or refinishing |
| Removing or altering a load-bearing wall for a layout change | Closet system installs |
| — | Pantry shelving upgrades |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs Hiring a Custom Cabinet Builder
| DIY | Hire a pro |
|---|---|
| Garage storage with flat-pack kits | Older homes with uneven walls or trim to match |
| Basic reach-in closet shelving | Full kitchen remodels |
| Small budget projects with no trim-matching needed | Load-bearing shelving or structural built-ins |
| — | Resale-focused upgrades where fit and finish matter |
Not sure DIY vs pro?
Get a Free EstimateWhen to call
When to Call for Custom Cabinets
Call Pflugerville Custom Cabinets at +1 (940) 531-3568 or request a free estimate below.
- Boxes are water-damaged or swollen at the base
- Trim doesn't match after a partial remodel
- An outdated layout is holding back a resale
- Drawers are failing or stock cabinets have warped
- You're converting a bonus room into an office or bar
Seeing warning signs?
Get a Free EstimateWhere we work
Serving Pflugerville and nearby communities
Local pages for these communities. Nearby towns without a page are still in our service area.
Also serving
Hutto · Manor · Round Rock · Brushy Creek · Taylor · Cedar Park · Georgetown · Leander · and others
Outside these locations?
Before & after
See the work up close
Before 
After
Customer feedback
What local customers say
Jason J.
1 week ago
5 out of 5 starsHonestly did not expect such a professional team. They showed up on time, explained every step, and the custom kitchen cabinetry turned out better than I pictured.
Pflugerville, TX
Brandon D.
5 days ago
5 out of 5 starsPrice was way more affordable than the other quotes we got for custom closet systems. Still felt premium — clean jobsite, solid finish, and I'd hire them again without thinking twice.
Blackhawk, TX
Emily L.
4 weeks ago
5 out of 5 starsCalled Pflugerville Custom Cabinets after a neighbor tip in Pflugerville. Super easy to deal with — clear answers, no runaround, and they actually cared about the details on our home office built-ins.
Falcon Pointe, TX
Common questions
Custom Cabinets FAQs
How much does Custom Cabinets cost in Pflugerville?
Most projects run $150-$600 per linear foot depending on wood species, box construction, and finish. A full kitchen typically lands between $8,000 and $35,000. Smaller builds like pantries or closets cost less.
How long does Custom Cabinets take?
A single room like a vanity or pantry can wrap in 2-3 weeks from design to install. A full kitchen usually runs 6-9 weeks once materials are ordered.
Do I need a permit for Custom Cabinets?
Straight cabinet swaps and refacing usually don't need one. Moving plumbing, electrical, or load-bearing walls usually does. Check with your county since Pflugerville spans both Travis and Williamson.
Is DIY Custom Cabinets a good idea?
For a garage or a basic reach-in closet, a stock kit can work fine. For a kitchen, older home trim matching, or anything load-bearing, a built-to-wall approach from a pro avoids gaps and wasted material.
When should I call a Custom Cabinets pro?
Call when boxes are water-damaged, trim doesn't match after a partial remodel, or a layout is blocking a resale. Also call before converting a bonus room into a bar or office.
What affects Custom Cabinets pricing?
Wood species, finish type, box construction (frameless vs. face-frame), hardware grade, and how much custom trim-matching is needed all move the number.
What is typically included in Custom Cabinets?
Boxes, doors, drawer fronts, hardware, and a finish coat. Trim matching, soft-close hardware, and install are part of a full custom build.
How do I prepare my home for Custom Cabinets?
Clear the room, remove items from existing cabinets, and have a rough idea of your budget and style before the first measure visit.
Ready for a clear estimate?
Tell us about the project, or call to talk through options in Pflugerville.